18
en
Dimensions (LxWxH) 630×150×173 mm
Weight (drive unit) 12.7 kg
Weight (drill stand) 17.9 kg
Drilling depth max. 500 mm without extension
Protection class as per EN/IEC 61029 protection class I (earthed)
Noise and vibration information (measured in accordance with EN 61029-1):
Typical A-weighted noise power level (LwA): 105 dB (A)
Typical A-weighted noise emission pressure level (LpA): 92 dB (A)
Wear ear protection
Typical weighted vibration at the hand wheel: < 2,5 m/s
2
Interference immunity as per EN 55014-2
Radio and television interference suppression as per EN 55014-1
* The machine is available in several versions with different voltage ratings. Please refer to the type plate for the voltage rating and input power
rating of your machine.
5. Safety precautions
CAUTION: The following basic safety precautions must
always be observed when using electric machines in
order to avoid the risk of electric shock, injury or fire.
Read all of these instructions before using this machine
and keep this list of safety precautions for future refer-
ence.
5.1 The necessary safety precautions at the work-
place
● Approval must be obtained from the site engineer or
architect prior to beginning drilling work. Drilling work
on buildings and other structures may influence the
statics of the structure, especially when steel rein-
forcing bars or load-bearing components are cut through.
● Ensure that the workplace is well lit.
● Ensure that the workplace is well ventilated.
● Keep the workplace tidy. Objects which could cause
injury should be removed from the working area. Untidi-
ness at the workplace can lead to accidents.
● When drilling through-holes, the area below the ceil-
ing, floor or behind the wall where the drilling is tak-
ing place must be secured as the drilled-out core may
fall out.
● Use clamps or a vice to secure the workpiece. The
workpiece is thus held more securely than by hand and
both hands remain free to operate the machine.
● Use protective equipment. Wear eye protection.
● Wear breathing protection if the work creates dust.
● Wear suitable working clothing. Do not wear loose
clothing, loose long hair or jewelry as it can become
caught up in moving parts. Wear suitable headgear if
you have long hair.
● It is recommended that rubber gloves and non-slip
shoes are worn when working outdoors.
● Keep children and other persons away from the work-
ing area.
● Do not allow other persons to tamper with the machine
or the supply cord.
● Avoid unfavorable body positions. Work from a secure
stance and stay in balance at all times.
● To avoid tripping and falling when working, always lead
the supply cord, extension cord and water hose away
to the rear.
● Keep the supply cord, extension cord, water hose and
vacuum hose away form rotating parts of the machine.
● CAUTION: Before beginning drilling, check that there
are no live electric cables located in the area where
the hole is to be made.
● Concealed electric cables or gas and water pipes pre-
sent a serious hazard if damaged while you are work-
ing. Accordingly, check the area in which you are work-
ing beforehand (e.g. using a metal detector). External
metal parts of the machine may become live, for exam-
ple, when an electric cable is drilled into inadvertent-
ly.
● Do not work from a ladder.
(35 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels